Engine warranties are limited to manufacturing defects in the block, heads, pistons, crankshafts, camshafts, rockers, and oil pumps. All other parts that may be provided are “Accessories and Extra Parts.” No warranty is provided for any such parts that are attached, including parts such as switches, sensors, cables, injectors, electronics, belts (including timing belt/chain), hoses, water pumps, manifolds and oil pans. Heat tabs are installed on engine if melted or missing warranty will be voided.
Yes 6 month and 1 year warranties are available at an additional charge. Please call us at 800-407-3711 for pricing.
We price compare over 20 different shipping carriers to ensure we offer some of the most competitive pricing nationwide. Delivery business to business is the least expensive and the most common. Lift gate service is available to any location at an additional $80. Residential delivery is also available at an additional $100.
A core is a term used in the automotive industry for the old defective engine in your vehicle. A core charge is a deposit left with us to ensure the core engine is returned. We pay the return shipping on the core engine. All core charges are refunded as soon as the old defective engine arrives at our location. This normally takes 2 – 3 business days.
They are small metal tabs that contain a specialized material in the center designed to melt at a specific temperature. They are used for monitoring engine temperature to determine whether or not a motor has exceeded the recommended margin, otherwise known as "overheating." Our engine heat tabs are designed for motor temperature monitoring of gasoline engines. The melting point of the specialized material in the center is 260 degrees F. The typical application produced in recent years will have a temperature range of roughly 195 to 220 degrees F. This is considered "normal" operating range. A gasoline engine can be considered to enter into overheated conditions at 230-240 degrees F, with serious damage starting to occur around 250+ degrees F. Thus once our heat tabs melt the warrantee becomes VOID.
Failure to complete the following will void Warranty: Determine why the original engine failure occurred and make appropriate repairs. Insure this engine is the same application as the one being replaced. Clear all computer diagnostic codes from the vehicle prior to installing. Exchange the oil pan and pick up tube. Inspect and replace gaskets & seals (front seal, rear main seal, valve cover gaskets, oil pan gaskets).
On crankshaft bolts that are drilled through sealant must be applied to avoid leaks. Install new thermostat & gasket. Replace the timing belt. Remove all "cap-plugs" orifice covers. Replace water pump. Install replacement sparkplugs & wires. Exchange the flywheel and bolts. Exchange attached accessory items to insure proper fit (mounts, intake manifold, exhaust manifold, distributor, sensors). Disable fuel/ignition before attempting to start engine. This will allow the oil to prime as indicated by the manufacturer. Replace engine oil, oil filter, air filter, fuel filters, coolant-antifreeze. Drain excess oil and coolant from exhaust system.
-If equipped with an engine oil cooler the radiator or external cooler must be replaced.
-If equipped with an engine oil cooler the radiator or external cooler must be replaced.
-Heat tabs are installed on engine if melted or missing warrantee will be voided.
Japanese Domestic Market (JDM) is a term for Japanese-brand goods, such as automobiles and parts. The term's most common application is to Japanese-brand automobiles built specifically for the Japanese market, i.e., designed and constructed to conform to Japanese vehicle and equipment regulations and to suit Japanese market preferences. JDM engines migrate to other markets through ordinary commerce. Because the engines are built for the Japanese market some modifications have to be made in order for them to be used in the U.S. Market. Such things like oil pans, timing covers, intake manifolds, censors, etc. Please ask your salesman for details as to your specific application.